Colony Flow Level 152 Walkthrough - Master the Umbrella Board's Perimeter Lane Strategy

Colony Flow Level 152 is an umbrella-shaped puzzle board where you must connect matching colors through a shared perimeter lane.

The key sequence starts with black 50 and cyan 26 establishing the outer arc, followed by yellow-orange ribs, green side panels, and finally the red canopy that completes the umbrella structure. This walkthrough breaks down the optimal flow path, explains how the perimeter lane controls the entire solve, and shows you which color pairs to connect first.

You’ll learn the exact order that prevents dead ends and the technique for threading multiple colors through the shared outer edge without blocking yourself.

What Is Colony Flow Level 152 Walkthrough?

Colony Flow Level 152 is an umbrella-shaped board where black 50 and cyan 26 must establish the outer perimeter lane before yellow ribs, green side panels, and the red canopy can be released. Most routes converge at a narrow crossing below the center, so the solve depends on careful timing rather than speed.

The main risk is filling the five white buffer slots before the perimeter is stable. Opening red or pink traffic too early traps canopy ants under the umbrella while black and cyan still share the same outside lane.

How to Play Colony Flow Level 152

1. Tap black 50 and wait for the ants to reach the crown and outer lane.
2. Tap cyan 26 so its 20/13/6 route can climb the arch.
3. When a buffer slot opens, tap yellow 24, yellow 44, and green 34. Wait for yellow to pass the crown and green to reach its side panel before adding more.
4. Continue with black 36, then the revealed yellow and green counters, including green 27/21/15. This opens the dark corners and side panels around the red center.
5. Feed the orange rib sequence in order: orange 20, orange 45, orange 30, then orange 42/21. Let each batch cross the lower center before tapping the next.
6. After the arch and ribs are moving, add red 40, red 33, red 25, and later red batches.
7. Hold pink 50 until both sides of the canopy have white space.
8. When the central red pixels split into separate strips, use green 17 and green 11/4 with cyan 25/40/30 to clear the lower rim.
9. Finish the small crown and outline counters in order: yellow 8, yellow 17, black 11, red 28, orange 40, then their reduced forms.
10. Close with cyan 32/21, then cyan 12/7/6/1 while green and yellow finish their side arcs. The board clears after the final cyan ant completes the perimeter loop.

Tips for Completing Colony Flow Level 152

• Establish the outside lane first. Black 50 and cyan 26 create the perimeter arc. Opening red 40 or red 33 before this step traps canopy ants below the umbrella.
• Watch buffer slots. Add yellow 24/44 and green 34 only when a slot is visibly empty and ants have crossed the brown hole.
• Feed orange one group at a time. Orange ribs and pink 50 both cross the lower center.
• Release pink late. Sending pink 50 before the canopy sides open blocks green side-panel routes.
• Save the final cyan cleanup for last. Keep cyan 32/21 and the later 12/7/6/1 sequence untouched until the board is nearly clear. Tapping cyan 6/1 too early leaves one blue rim fragment on the white board.

Common Mistakes to Avoid

• Opening red 40 or red 33 before black 50 and cyan 26 have established the perimeter.
• Adding pink 50 while orange ribs still cross the lower center.
• Treating cyan 6/1 as finished before the ants complete the outer loop.

Related Games

• Colony Flow Level 50 Walkthrough — Continue with another advanced Colony Flow puzzle walkthrough that uses the same timed color-routing and buffer-management mechanics.

Enjoy!