Colony Flow Level 93 Walkthrough - Master the Single-Path Timing Puzzle Before You Get Stuck at 60%

Colony Flow Level 93 Walkthrough guides you through one of the trickiest puzzle stages in Colony Flow, where strategic pipe placement and resource management become critical.

This level introduces tighter space constraints and requires precise timing to direct your colony’s flow without bottlenecks or overflow failures. This walkthrough focuses on the optimal pipe layout, the order of connections that prevents early-game gridlock, and which resource nodes to prioritize first.

You’ll find step-by-step visual cues for the opening moves, the mid-game expansion pattern that maximizes throughput, and troubleshooting tips for the two most common failure points players hit around the 60% completion mark.

Colony Flow Level 93 Walkthrough

Colony Flow Level 93 uses a single shared path for all colors. Tap the purple 1 stack first (active row, cell 3), then brown 14 (cell 1), beige 30 (cell 2), brown 36 (cell 4), and orange 32 (cell 5). Wait one beat between taps so each wave starts clearing before the next enters the path. After the active row clears, drain source row 1 in order: blue 50, cyan 30, blue 50, cyan 45. Then source row 2: yellow 21, yellow 35, yellow 24, cyan 47, yellow 50. Finally source row 3: cyan 35, cyan 20, cyan 25, cyan 33, cyan 50.

The main trap is releasing the blue50 body wave before the perimeter colors finish. Blue ants need the open route to reach the large blue body region.

How to Play Colony Flow Level 93 - Step-by-Step Solution

1. Tap purple 1 in active-row cell 3. Wait until the bottom purple border cells begin to clear.

2. Tap the remaining active-row stacks in order, keeping one beat between each:

   • Brown 14 (cell 1) — traces the brown outline along the bottom edge
   • Beige 30 (cell 2) — clears beige highlights inside the blue body
   • Brown 36 (cell 4) — continues the brown outline on the opposite side
   • Orange 32 (cell 5) — clears the orange accent in the lower-right corner

3. Drain source row 1 in order:

   • Blue 50, cyan 30, blue 50, cyan 45, cyan 45

   Do not start the first blue 50 until orange 32 is mostly cleared. Blue and cyan ants share the path and clear the large blue body plus cyan accents inside it.

4. Drain source row 2:

   • Yellow 21, yellow 35, yellow 24, cyan 47, yellow 50

   Wait for source row 1 to clear before starting. Yellow ants clear the cap; cyan 47 clears additional cyan highlights. Release cyan 47 only after the blue body is at least half-cleared.

5. Drain source row 3:

   • Cyan 35, cyan 20, cyan 25, cyan 33, cyan 50

   The final cyan 50 clears the remaining lower-band accents and completes the level.

Tips for Colony Flow Level 93

• Clear the active row first. Purple 1, brown 14, beige 30, brown 36, and orange 32 must drain in that order before touching any source row stack. These waves clear the perimeter and open the path for the blue body.

• Wait for traffic to clear. Each color uses the same dirt path. Tapping a stack while the previous wave is still walking strands ants on remaining cells and blocks later stacks.

• Keep cyan 47 late. Cyan highlights are small and share the path with blue body ants. Tapping cyan 47 in source row 2 before the blue body is half-cleared blocks the five cyan stacks in source row 3.

• Follow source row order. Drain row 1 completely before starting row 2, and row 2 before row 3. Skipping ahead can strand required color waves and prevent the board from clearing.

Related Games

• Colony Flow Level 50 Walkthrough — Continue with another late-game Colony Flow puzzle that similarly requires timing color-stack releases through a shared path.
• Colony Flow Level 36 Walkthrough — This walkthrough offers another focused route-order solution for players practicing careful active-row and refill-stack management.

Enjoy!